ERROR SC-681-06 on RICOH MPC401

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jama
    Technician
    • Jul 2020
    • 49
    #1

    [Error Code] ERROR SC-681-06 on RICOH MPC401

    Checked all possible causes for ERROR SC-681-06 on RICOH MPC401, including toner cartridges chips...what could be other reason excluding RFID controller board? any assistance will be highly appreciated.. See image bellow


    errormpc401.jpg
    Tags: board, error, mpc401, ricoh, sc-681-06
    • anothertech
      Service Manager

      Site Contributor
      1,000+ Posts
      • Nov 2007
      • 1715
      #2
      Re: ERROR SC-681-06 on RICOH MPC401

      Try putting in another new black toner bottle.

        Comment

        • COPIERMAN
          Senior Tech

          500+ Posts
          • Jun 2009
          • 553
          #3
          Re: ERROR SC-681-06 on RICOH MPC401

          have you vacuum inside black toner hopper area /check contacts up inside hopper could be one contact is stuck back not spring outward

            Comment

            • Jama
              Technician
              • Jul 2020
              • 49
              #4
              Re: ERROR SC-681-06 on RICOH MPC401

              Originally posted by COPIERMAN
              have you vacuum inside black toner hopper area /check contacts up inside hopper could be one contact is stuck back not spring outward
              Yes, but will do again ...coz the error was on and off. but now permanently
              thanks

                Comment

                • Jama
                  Technician
                  • Jul 2020
                  • 49
                  #5
                  Re: ERROR SC-681-06 on RICOH MPC401

                  Originally posted by anothertech
                  Try putting in another new black toner bottle.
                  New toner installed in vain

                    Comment

                    • copytrust
                      Trusted Tech

                      100+ Posts
                      • Feb 2010
                      • 109
                      #6
                      Re: ERROR SC-681-06 on RICOH MPC401

                      Originally posted by Jama
                      New toner installed in vain

                      Was the toner original???

                      i am only asking cause i had a experience were the user bought a compatible toner and forget to remove a tape, and he messed up the machine.

                        Comment

                        • mga
                          Copier Technician

                          Site Contributor
                          1,000+ Posts
                          • Dec 2010
                          • 1393
                          #7
                          Re: ERROR SC-681-06 on RICOH MPC401

                          Originally posted by Jama
                          Checked all possible causes for ERROR SC-681-06 on RICOH MPC401, including toner cartridges chips...what could be other reason excluding RFID controller board? any assistance will be highly appreciated.. See image bellow


                          [ATTACH=CONFIG]49028[/ATTACH]
                          Most of the time it's rubbish compatible toner and chip and or customer keeps putting in and out and damage rfid pwb
                          Regards Mark

                          FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                          RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                          https://copierservices.simdif.com

                            Comment

                            • Jama
                              Technician
                              • Jul 2020
                              • 49
                              #8
                              Re: ERROR SC-681-06 on RICOH MPC401

                              Originally posted by copytrust
                              Was the toner original???

                              i am only asking cause i had a experience were the user bought a compatible toner and forget to remove a tape, and he messed up the machine.

                              Yes original installed

                                Comment

                                • mikadonovan
                                  Senior Tech

                                  Site Contributor
                                  2,500+ Posts
                                  • May 2008
                                  • 2936
                                  #9
                                  Re: ERROR SC-681-06 on RICOH MPC401

                                  There is another thing to consider. The manual states that EM/RF interference will also cause this. I had a c400 that the rfid board was replaced, and it still got codes like that. It was determined the location of the machine was the problem.
                                  NEVER ASSUME ANYTHING

                                    Comment

                                    Previous template Next
                                    Working...