Ricoh SFP A3 Counters C4503

[LowlevelSFP]

I'm trying to determine a customers A3 usage in both colour and mono but device counters don't seem to split it on report. When looking at monitoring software it's hard to gauge exactly which counter would be the all inclusive total for mono and colour. Any insight would be appreciated, I've added the table below for what I see. My best guess is 30k a3 colour and then mono would be large paper prints minus the full colour a3 but hard to tell.

Large Paper Prints: >=A3,DLT	34292
No. of Dup. Pt.: <A3, DLT: Cop.	15962
No. of Dup. Pt.: <A3, DLT: Prt.	246969
No. of Dup. Pt.: <A3,DLT: Total	262931
No. of Dup. Pt.:>=A3, DLT: Cop.	21
No. of Dup. Pt.:>=A3, DLT: Prt.	6083
No. of Dup. Pt.:>=A3, DLT: Tot.	6104
Total Prints: <A3,DLT: Copier	69189
Total Prints: <A3,DLT: FAX	2193
Total Prints: <A3,DLT: Printer	778597
Total Prints: <A3,DLT: Storage	281
Total Prints: <A3,DLT: Total	850260
Total Prints: >=A3,DLT: Copier	2009
Total Prints: >=A3,DLT: Printer	26164
Total Prints: >=A3,DLT: Total	28173
Total Prints: Full Color A3	30042

[dalewb74]

i would take the largest number and subtract storage.

[LowlevelSFP]

Appreciate the thought but I don't think I gave full information. We're looking at a machine that is sitting 960k mono and 223k color pages printed right now. The vast majority of printing is going to be on letter paper as opposed to ledger. I'm positive that won't be right.

[slimslob]

If the machine was setup properly when first installed, then DLT pages would be counted as 2 on the main counter printout. But bear in mind. that number does not include faxes received. There is a counter printout that does include faxes. It used to be under Administrator Setting, the second page.