SP mode access on an IMC 530FB

[mikadonovan]

The UI is different on this model. This is probably a stupid question, but how do I access SP mode on ans IMC 530 FB?

[sandmanmac]

Hey Mika.
I've not seen any of this model yet, but what do you mean by the UI is different? Just the icons, apps, etc?
I'm personally not aware of the SP access procedure being any different on any of IMC series.
Is it a keypad you're having trouble bringing up in order to access SP mode? Do you know the process of pressing the microswitch 3 under the cover on the side of the SOP, and check status button simultaneously to bring up a keypad?

[mikadonovan]

Thanks, Sandy. I usually just bring up the copier app with the keypad to the right. I spent part of the afternoon looking for the classic apps to install to no avail. Take care and thank you. Should be good in the morning!

[sandmanmac]

I had a feeling that might be the case. Happy I could shed some light for you

[slimslob]

Thanks, Sandy. I usually just bring up the copier app with the keypad to the right. I spent part of the afternoon looking for the classic apps to install to no avail. Take care and thank you. Should be good in the morning!

If it is a printer only model. it might not have any functions that require a number pad

[sandmanmac]

It's a colour mfp

[copyboy99]

on this model SOP EX3 button is on the Right side, hidden in small cover, use EX3 and Check Status to get the Number pad. No Classic apps on this model.

[mikadonovan]

I got it sorted out. Thanks for the responses.