Ricoh MP C2500 Error Code SC672 on Startup.

[bob marley]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

check the setting of SP5875-001. if the setting is set to 1 (OFF) change it to 0 (OFF).

[copier tech]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

Hi Friends,
I have a Ricoh MP C2500. When I m starting it, it is giving error SC672 on startup screen. after search on Google I tried to remove and reconnect HDD and RAM and restart it. but problem not solved. Can any one help me to remove this error? it is also not going to service mode. just stuck on startup screen.

Try to update the firmware if this fails replace the controller board.

[slimslob]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

In my experience this code generally means a controller replacement. Redoing thr connections won't hurt, but I can't recall once fixing that code without a replacement controller.

Sent from my SM-N770F using Tapatalk

I have never had to replace the controller. It has always been the harness. With the newer models it is the USB cable.

[Polarbear]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

SC 672 is a communication error between the controller and the operation panel. It is usually caused by a bad connection. Disconnect and reconnect the harness going to the operation panel at both ends.

In my experience this code generally means a controller replacement. Redoing thr connections won't hurt, but I can't recall once fixing that code without a replacement controller.

Sent from my SM-N770F using Tapatalk

[slimslob]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

SC 672 is a communication error between the controller and the operation panel. It is usually caused by a bad connection. Disconnect and reconnect the harness going to the operation panel at both ends.

[Rada]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

Sounds like your controller has called it a day.

Sent from my SM-N770F using Tapatalk

Tel me how can I fix this error? What should I do?.

[Polarbear]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

Sounds like your controller has called it a day.

Sent from my SM-N770F using Tapatalk

[Rada]

Hi Friends,
I have a Ricoh MP C2500. When I m starting it, it is giving error SC672 on startup screen. after search on Google I tried to remove and reconnect HDD and RAM and restart it. but problem not solved. Can any one help me to remove this error? it is also not going to service mode. just stuck on startup screen.