If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have lowered the fuse temp, in all places to do so,
1-1105 fc center was default i set to 125
1-1106 fc press was default i set to 112
no difference/ I took my own paper no difference / firm ware is up to date/
i have others without fins that dont do this with no extra exit guide piece .....
any one have a solution? Thanks
do you have this? many customers drop it, and throw it away
Comment