Happens intermittently no problem found.
-
-
Something having to do with the cutter home position. Dirty or failing HP sensor, cutter binding, cutter motor, harness, IOB or roll feed board. -
SC513-00 D Registration Gate Position Error
Home position on/off was not detected within the time limit.
Gate Retract HP Sensor connector disconnected and
defective
Gate Retract HP Sensor disconnected and defective
Defective operation due to overload
Defective operation due to the motor driver defective
Gate Retract HP Sensor shield deformed/broken/incorrectly
attached
Cycle the machine off/on.
KB Number: KB0187223 KB use count : 1
Resolution:
Remove paper that was wrapped up from the area around the registration gate motor drive.
KB Number: KB0175485 KB use count : 1
Resolution:
Reconnect the registration gate motor
Comment
Comment