imc530 - DF skew - scan & copy

[Mark Bbb]

Thanks for your help...

[davel]

[Mark Bbb]

Re: imc530 - DF skew - scan & copy

You’re welcome.

That's nice i feel saved now....

[Mark Bbb]

Re: imc530 - DF skew - scan & copy

ok, it seems that i have to repeat what was in the Title:
imc530 - DF skew - scan & copy

Do you experience skew?

[Gift]

Re: imc530 - DF skew - scan & copy

Sorry, I haven't had a chance to work with that model - looks like some other brand engine (kyo based?).

[Mark Bbb]

Re: imc530 - DF skew - scan & copy

Sorry, I haven't had a chance to work with that model - looks like some other brand engine (kyo based?).

Gift, wright, here in Belgium the imc300 is in B.O. for about 6 months.
This is a meanwhile solution...

[luca72]

Re: imc530 - DF skew - scan & copy

Thanks for your help...

try to remove the rear plastic cover of the ADF, and tighten the large internal screw of the hinge .... while you're at it I would put some "cyano-acrylate attack" on the thread, I noticed that, in the long run, they can be unscrewed again