IMC6000 with strange module P/N

[Raymond]

Re: IMC6000 with strange module P/N

I'd love to check but my fu**ing dealer account seems bricked (again)

Errr......

Looks like Ricoh EU work no better than Ricoh China, whick makes me feel not so bad.

[luca72]

Re: IMC6000 with strange module P/N

Errr......

Looks like Ricoh EU work no better than Ricoh China, whick makes me feel not so bad.

check your mail, i send you all 3 disponible firmware file paqckages with wetransfer, you need renominate the file, deleting a file description

(es. d123456q_for chn.pkg in d123456q.pkg)

let we know if you resolve it!

[Raymond]

Re: IMC6000 with strange module P/N

check your mail, i send you all 3 disponible firmware file paqckages with wetransfer, you need renominate the file, deleting a file description

(es. d123456q_for chn.pkg in d123456q.pkg)

let we know if you resolve it!

luca72, you're Super Hero! Everything goes well.
Just can't wait to come back to thank you and Gift, and slimslob, sandmanmac. Thank all the people here who give me help and suggestions.

And I must share the heartquake experience.

----------------------------------------------------------------------------

According to Technical Bulletin No.:RD0BL026, I changed SP5-886-101(skip LR check) from 0 to 1, and used D0BN5595Q .
After two warning of "P/N will change" (Sorry, there are much more text displayed. But I'm too excited to be aware of not having taken a photo.) , updated as usual.

After reboot mannually, as SOP prompted, An Error came to an end, indicating wrong F/W region.
Error.jpg

I used RFUT (update to 1.5.0). It downloaded D0BN5596K (4.59, as I mentioned last week) again. Flashed the copier using this, making a "ghost" JAM on Bridge Unit prompted.
I opened the Bridge Unit, found nothing jammed there, clean it, reboot, again and again. But the JAM red light was always there.

Finally, I tried D0BN5596L(v4.60.1, for China. Though I don't know where you get it), with only little hope.
The wonderful thing occurred! The JAM hint gone. Print, copy, scan... Everything goes well.

AND the most important thing is, custom firmware get over-written forever! RFUT can recognize the copier, scan for update now.
Although D0BN5596K (4.59) is the most recent F/W and v4.60.1 is not released yet in China.
But this is only a matter of time. I can rely on RFUT as others in future.

----------------------------------------------------------------------

Thank you for ALL your kind help!

These experiences, to every IMC6000 user who might need it!
AND users out of CHINA, NEVER MIND THE ERROR SCREEN ABOVE. YOU WON'T SEE IT!


Last But NOT Least. Cannot help SHOWING OFF my new P/N here.

System/Copy 4.60.1 D0BN5551H
Network Support 18.86 D0BL5578W
Web Support 4.03 D0BN5571
Fax 04.60.00 D0BL5560T
RemoteFax 04.60.00 D0BL5562L
Scanner 04.02 D0BL5568S
Web Uapl 4.02 D0BN5572Q
NetworkDocBox 4.60 D0BL5574P
animation 4.01 D0BN5576H
Printer 4.59 D0BN5581W
RPCS 3.23.15 D0BN5583C
Font EXP 1.00 D2415581
PCL 1.07 D0BL5584E
IRIPS PS3 1.00 D0BL5586A
IRIPS PDF 1.18 D0BL5588M
IRIPS Font 1.15 D0AF5577A
GraphicData 3.01 D0BN5591Q
MovieData 1.00 D0BN5561B
MovieData2 1.00 D0BN5563B
MovieData3 1.00 D0BN5565B
Data Erase Onb 1.05 D2625244
FCU 01.00.00 D0BW5778A
PowerSaving Sys F.L3.23.1 D0BN5556C
RicohACT 1.20 --------
Engine 1.17:04 D0BQ5503Q
OpePanel -------- --------
ADF 01.050:02 D3FF5260F
Finisher 01.060:07 D3FN5260J (Here! )
Bank1 01.010:05 D3FY5260E