imc300 mpc307 pcdu's error after ITB unit replacement

[Mark Bbb]

Re: imc300 mpc307 pcdu's error after ITB unit replacement

Imgur: The magic of the Internet

YOu can upload there and post the link here. Uploading on CTN usually requires to shrink the images so imgur might be easier.

YES, that was the one!

[Mark Bbb]

Re: imc300 mpc307 pcdu's error after ITB unit replacement

About a year ago some gentle member had post me a link for which i could drop pictures to, and then afterwards posted the link here.
That worked fine, but since i have cleaned up my computer it has gone lost.
Anyone?

[Gift]

Re: imc300 mpc307 pcdu's error after ITB unit replacement

I'm not a picture posting hero:
https://www.copytechnet.com/forums/s...56=#post862506
I' m going to try

Imgur: The magic of the Internet

YOu can upload there and post the link here. Uploading on CTN usually requires to shrink the images so imgur might be easier.

[Mark Bbb]

Re: imc300 mpc307 pcdu's error after ITB unit replacement

nope, it is not working i tried with irfan

[Mark Bbb]

Re: imc300 mpc307 pcdu's error after ITB unit replacement

No that's not normal - can you make a picture of that "suspicios" area? I can compare your findings with our demo machine.

I'm not a picture posting hero:
https://www.copytechnet.com/forums/s...56=#post862506
I' m going to try

[Gift]

Re: imc300 mpc307 pcdu's error after ITB unit replacement

Gift, i have respected the serv manual procedure. But still...
There is a little spring inside the machine at the rear side which i think has popped out it's position .
Ever time i remove or insert the itb unit it's making a cracking sound.
Can you remember if that is normal?
Thanks

No that's not normal - can you make a picture of that "suspicios" area? I can compare your findings with our demo machine.

[Mark Bbb]

Re: imc300 mpc307 pcdu's error after ITB unit replacement

Try and carefully remove the ITB Unit - access is from the right side, remove the fuser first to get a good access. IIRC you don't even need a tool for that.

Gift, i have respected the serv manual procedure. But still...
There is a little spring inside the machine at the rear side which i think has popped out it's position .
Ever time i remove or insert the itb unit it's making a cracking sound.
Can you remember if that is normal?
Thanks

[Gift]

Re: imc300 mpc307 pcdu's error after ITB unit replacement

Try and carefully remove the ITB Unit - access is from the right side, remove the fuser first to get a good access. IIRC you don't even need a tool for that.

[Mark Bbb]

Hoi,
We can't fully insert the pcdu's.
The ITB bias rollers are engaged (so in the printing position, facing downwards).
I think that is the issue?
We have not replaced the itb unit (it was just for practicing before going to customer, we have not many mpc307)
Thanks in advance