SR-4150 Finisher, Paper Handling unit, broken part. Is iit the same as the 4140?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • owelesstax
    Technician
    • May 2020
    • 16
    #1

    SR-4150 Finisher, Paper Handling unit, broken part. Is iit the same as the 4140?

    On the upper paper handler section of my SR-4150 (booklet Finisher) a part broke. Black plastic, kind of a flapper, the last position before the paper path goes to the staple unit. I doubt I can buy that plastic piece.

    Looking for a reasonable fix, that would be less than buying a whole finisher new. One option I just thought if a used SR4140 (non-booklet finisher) (probably cheaper) if the Upper Paper transport was the same I could R&R that section.

    Richard

    Thanks for all who have been so helpful over the years.
    Tags: finisher, paper, part, sr-4150, unit
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37357
      #2
      Re: SR-4150 Finisher, Paper Handling unit, broken part. Is iit the same as the 4140?

      Most likely yes. As probably will one form an older 1000 sheet finisher. Ricoh hasn't changed much other than electronics and color to match the current model copier on those 1000 sheet finishers.

        Comment

        • owelesstax
          Technician
          • May 2020
          • 16
          #3
          Re: SR-4150 Finisher, Paper Handling unit, broken part. Is iit the same as the 4140?

          Originally posted by slimslob
          ... Ricoh hasn't changed much other than electronics and color to match the current model copier on those 1000 sheet finishers.
          You wouldn't happen to have one laying around...?

          Thanks for the info. I didn't think about other generations. With all of your experience, what do you imagine the range of models might be?

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 37357
              #4
              Re: SR-4150 Finisher, Paper Handling unit, broken part. Is iit the same as the 4140?

              Originally posted by owelesstax
              You wouldn't happen to have one laying around...?

              Thanks for the info. I didn't think about other generations. With all of your experience, what do you imagine the range of models might be?
              No, I have been retired for 7 years.

                Comment

                • owelesstax
                  Technician
                  • May 2020
                  • 16
                  #5
                  Re: SR-4150 Finisher, Paper Handling unit, broken part. Is iit the same as the 4140?

                  Originally posted by slimslob
                  No, I have been retired for 7 years.
                  I knew it had been a while, I really appreciate your commitment to being a resource here.

                  Richard

                    Comment

                    • owelesstax
                      Technician
                      • May 2020
                      • 16
                      #6
                      Re: SR-4150 Finisher, Paper Handling unit, broken part. Is iit the same as the 4140?

                      Originally posted by slimslob
                      No, I have been retired for 7 years.
                      <br>
                      <br>I knew it had been a while, I really appreciate your commitment to being a resource here.<br><br>Richard

                        Comment

                        Previous template Next
                        Working...