If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
the machine reports toner cetridge are not set correctly, please set correctly , I put a new catridge and a new drum unit , nothing happens the appliance again the same occurs
any idea ?
Greatings
[QUOTE=Gift;2219155]IDCHIP.jpg
I found that one pin on the conector flew out, but visually it was not seen at first sajt
tnx a lot man this is save ma life
Greteengs
[ATTACH=CONFIG]54818[/ATTACH]
I found that one pin on the conector flew out, but visually it was not seen at first sajt
tnx a lot man this is save ma life
Greteengs
Comment