RICOH SP1000SF Wait for init Card

[TonerMunkeh]

I had one of these do this once. The main board in the machine has packed up and it requires a new one.

[Sashko]

This Ricoh is from a friend of mi and he sad he have just do a factory reset There is now way to make it work Is There another possibility?
i dont anderstand wat this init Card means.Mayby its an brand init card to download the programm?

for an answer a glass of wine

For information,
I have 2 machines with this problem.
I couldn't solve this problem.
SP1000sf have some similar machine another brands - Sagem MF5461/5481, Xerox 3100MFP, OKI B2500.
I found the information about INIT CARD in the user manual on Sagem, see attachment file.
INIT CARD is installation card that supplies with machine but only on Sagem.
This message appearing only if you execute "arrow down", "8", "5" and "arrow down", "#", "4", p.104 SM.
Never perform this "Erase the consumable counters".
Update the firmware to latest version (Ricoh delete this function from service mode).

[Harry]

harry is still her

Thank you at all
I wish everyone a happy New Year and a holly chrismax
Turn at work My Friend replace the logik board maybe the only thing to get it work.
Thank you at all

[Dumus]

The same problem I have when flash with new firmware (1.06b). Than I put down firmware to with V + # + 0 but the same :
Wait for init card. Any sugestion?

[Dumus]

Re: RICOH SP1000SF Wait for init Card

To refresh the topic, after 5 years.
In the T & B for this machine I found that there: H320 9500 - Smart Card Maintenance.
Did anyone used this and how? (Because in SM not a word about it).
Any response?