Ricoh MPC6003

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ribatur
    Junior Member
    • Feb 2023
    • 4
    #1

    Ricoh MPC6003

    Dear all

    I have installed a Ricoh MPC6003 but I have experienced some lags (more than 1 minutes) when I finished to print out some documents from pc and started to make some photocopies. It seems like the machine is verify or testing or performing some controls before starting a new function. Have you already had some experienced concerning this problem?
    Tags: experienced, mpc6003, performing, ricoh, testing
    • ridgemill
      Trusted Tech

      100+ Posts
      • Sep 2017
      • 180
      #2
      Re: Ricoh MPC6003

      Do you the Data Overwrite Security enabled, or Data Overwrite Security Unit Type H / I installed?

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37062
          #3
          Re: Ricoh MPC6003

          Sounds like it is running Process Control (Pro Con). Check SP 3533-001 and -011 and SP 3534-001 and -011. SP 3533 will interrupt during a job. SP 3534 will interrupt at the end of a job. If the set number of page have occurred since the last Pro Con, it will run again. Default is 500. Setting to 0 will disable but may cause slight decline in image quality.

            Comment

            • TonerMunkeh
              Professional Moron

              2,500+ Posts
              • Apr 2008
              • 3865
              #4
              Re: Ricoh MPC6003

              Could also be the HDD is getting a bit tired. Try also disabling SP5730, switch the Java off.
              It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

              Hit it.

                Comment

                • Oze
                  Ricoh Fanboy

                  1,000+ Posts
                  • Jul 2008
                  • 1663
                  #5
                  Re: Ricoh MPC6003

                  WSD printing?
                  Are you using the correct port and print driver?

                    Comment

                    • ribatur
                      Junior Member
                      • Feb 2023
                      • 4
                      #6
                      Re: Ricoh MPC6003

                      dear colleagues

                      I have checked all the process control you have written as a reply to this thread and the machine now is becoming faster.

                      Thank you very much

                        Comment

                        Previous template Next
                        Working...