If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
In case they would be mice rather than lizards, it could happen when parts are left without covers, open holes...
In my early days repairing home electronics and computers, I found roach / mouse infestations, pet fur / dander, lizards and snakes...maybe even the occasional talking unicorn, (though I did smoke a bit of weed back then.)
Hi Guys
I've got a IMC3500 with a very unusual fault. It appears this issue occurred after a power cut over a weekend (according to the customer).
When you power the machine up everything boots up normally to the point where the SOP loads the home screen (minus any icons) after about 30 seconds the SOP displays shutting down and the machine shuts down.
Initially I thought I had a power supply issue, but a new power supply didn't resolve. So next logically step was to look at the controller board or HDD. HDD was easy and I eliminated that quickly. So next was the controller board maybe not talking to the SOP but new controller board made no difference. So, let's try the SOP, again no difference. Next was the BICU board, tried this but again no difference.
At this point I'm really running out of options, corrupt NVRAM maybe?
Any thought would be appreciated.
Oh, and I tried loading latest firmware but the machine won't boot to a SD card.
Morning team
i have this similar problem above . how was
this one resolved, Our IM 7000 is behaving exactly as explained above.
i need your especially Ricoh Tech,
Comment