Ricoh MP C401

[pinkyman]

Re: Ricoh MP C401

Seem that She Say "restart the machine"...and next step its retype the admin password (leave blank two time)...anyway try to catch a photo in Google translate to know what wrote...dont worry, be Happy, I've done this process dozens of times, never a problem��

I translated it by google it says preparing for firmware update and stopped as it is

[luca72]

Re: Ricoh MP C401

When i reverse the two v ram and start up the machine it wrote ���� Japanese letters and freeze like that pic in attachment without any action .. i let it about one hour and the situation as it is

Seem that She Say "restart the machine"...and next step its retype the admin password (leave blank two time)...anyway try to catch a photo in Google translate to know what wrote...dont worry, be Happy, I've done this process dozens of times, never a problem��

[pinkyman]

Re: Ricoh MP C401

At second restart, She ask to you a new admin password, (like when the MC its new out the paper box) that you leave blank, this permit you to log in and remove the service SP lock....p.s. i wrote without Google translate ��

When i reverse the two v ram and start up the machine it wrote 🇯🇵 Japanese letters and freeze like that pic in attachment without any action .. i let it about one hour and the situation as it is

[luca72]

Re: Ricoh MP C401

i'm already did these steps but the machine run normally without asking any password or anything not normal .. and i can't enter sp mood .. it's driving me wild

At second restart, She ask to you a new admin password, (like when the MC its new out the paper box) that you leave blank, this permit you to log in and remove the service SP lock....p.s. i wrote without Google translate ��

[slimslob]

Re: Ricoh MP C401

i'm already did these steps but the machine run normally without asking any password or anything not normal .. and i can't enter sp mood .. it's driving me wild

What exactly happens when you try to get into standard Service Program Mode?

[pinkyman]

Re: Ricoh MP C401

you have to physically access the controller board, and invert the position of the two nv-rams, put 1 on 2, 2 on 1, (be careful, respect the direction of the notch otherwise they burn), then turn on the machine, the first time it goes in Japanese, turn it off again and turn it on again, and it should ask you for an admin password, which you obviously put blank, after you restart it, and go to sp 5-985-001 and enable the NIC with 1, I don't think I something is forgotten.

anyway see the attachment.

to switch the language, arrange yourself, you have to see it at the moment

i'm already did these steps but the machine run normally without asking any password or anything not normal .. and i can't enter sp mood .. it's driving me wild

[luca72]

Re: Ricoh MP C401

thanx bro .. can you explain it .. how could i do it

you have to physically access the controller board, and invert the position of the two nv-rams, put 1 on 2, 2 on 1, (be careful, respect the direction of the notch otherwise they burn), then turn on the machine, the first time it goes in Japanese, turn it off again and turn it on again, and it should ask you for an admin password, which you obviously put blank, after you restart it, and go to sp 5-985-001 and enable the NIC with 1, I don't think I something is forgotten.

anyway see the attachment.

to switch the language, arrange yourself, you have to see it at the moment

[pinkyman]

Re: Ricoh MP C401

At this point you not have way, invert the nv-ram's, and reset everything...and activate It the nic via SP

this is control pic .. i invert the two bios in the pic but there's no action

[pinkyman]

Re: Ricoh MP C401

At this point you not have way, invert the nv-ram's, and reset everything...and activate It the nic via SP

thanx bro .. can you explain it .. how could i do it

[luca72]

Re: Ricoh MP C401

I think your Google translate is broken.

I try not to use Google translate, otherwise I won't learn anymore, only when I'm in a hurry, or I can't remember a word, or some term

[slimslob]

Re: Ricoh MP C401

I think your Google translate is broken.

I have no trouble understanding what he posts.

[copier tech]

Re: Ricoh MP C401

At this point you not have way, invert the nv-ram's, and reset everything...and activate It the nic via so.

I think your Google translate is broken.

[luca72]

Re: Ricoh MP C401

login button didn't work i mean didn't do any action just peep only

At this point you not have way, invert the nv-ram's, and reset everything...and activate It the nic via SP

[luca72]

Re: Ricoh MP C401

login button didn't work i mean didn't do any action just peep only

At this point you not have way, Reverse It the nv-ram, and reset everything...and activate It the nic via sp.

[pinkyman]

Re: Ricoh MP C401

Log in as admin & go to administrator tools tap most likely its been disabled there.

login button didn't work i mean didn't do any action just peep only