6002 Jam codes

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mikadonovan
    Senior Tech

    Site Contributor
    2,500+ Posts
    • May 2008
    • 2931
    #1

    6002 Jam codes

    Hi, All. I have a MP6002 with a SR 4080 finisher attached. I am getting misfeeds with a jam code of 151. Only problem is, there is no jam code 151 listed in the tables. I believe that it has something to do with the punch unit (maybe) due to where I am finding paper at. However, I can run 100 punched sheets with no misfeeds sometimes. Driving me nuts. Any assistance will be appreciated.
    NEVER ASSUME ANYTHING
    Tags: code, finding, jam, misfeeds, paper
    • Codex
      Senior Tech

      500+ Posts
      • May 2008
      • 694
      #2
      Re: 6002 Jam codes

      Originally posted by mikadonovan
      Hi, All. I have a MP6002 with a SR 4080 finisher attached. I am getting misfeeds with a jam code of 151. Only problem is, there is no jam code 151 listed in the tables. I believe that it has something to do with the punch unit (maybe) due to where I am finding paper at. However, I can run 100 punched sheets with no misfeeds sometimes. Driving me nuts. Any assistance will be appreciated.
      Hello

      If you check the Mp6001 series... J151 is "Entrance sensor".... But in the B830 finisher, ricoh jam codes are all similar... Maybe this helps

      Inviato dal mio SM-S901B utilizzando Tapatalk
      Memento Audere Semper

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37048
          #3
          Re: 6002 Jam codes

          Originally posted by Codex
          Hello

          If you check the Mp6001 series... J151 is "Entrance sensor".... But in the B830 finisher, ricoh jam codes are all similar... Maybe this helps

          Inviato dal mio SM-S901B utilizzando Tapatalk
          Looking at SP7-504 Paper Jam Location, 151 is finisher entrance for any finisher.

            Comment

            • mikadonovan
              Senior Tech

              Site Contributor
              2,500+ Posts
              • May 2008
              • 2931
              #4
              Re: 6002 Jam codes

              I figured it out. The bottom of the finisher entrance guide is supposed a locator pin to restrict side to side movement. This one does not.
              Attached Files
              NEVER ASSUME ANYTHING

                Comment

                Previous template Next
                Working...