Aficio 1055 reg mylar

[aabarnes1]

I can't figure out in the parts manual the correct part no for this thing(the mylar that sits behind the guide plate) does anyone have itand has anyone replaced one of these- it looks a bit shitty, help would be appreciated

[stephend]

I can't figure out in the parts manual the correct part no for this thing(the mylar that sits behind the guide plate) does anyone have itand has anyone replaced one of these- it looks a bit shitty, help would be appreciated

[aabarnes1]

Which part no is the part with the mylar attached to it- thanks a million!

[stephend]

[aabarnes1]

Cheers!

[bonnie750]

looks worse than it is. right end covers off, rear upper cover, front door, duplex, dev unit, cover over meter and blue knobs, 2 motors off at the back and 4 screws that hold the regi ass. in,one or two connectors and I think thats it, give or take a part or two

Careful when assembling not to trap wires when offering up the regi ass. the edges are quite keen and will easily slice through them.

[stephend]

You can not "love" those babies...500/700 and 1055. I can not count the scars caused by the sharp edges...and God bless the guy who decided to redesign the scanner system on 1060's and newer machines cause 500...1055 is a nightmare. Cheers