MPC 3003 keep restarting by itself after ready.

[alvin_3000e]

MPC 3003 copier keep restarting after a few hours when copier is in ready state. What causes the copier to restart by itself after it is ready state. Could it be the hardisk need replacement. I have reformat the hardisk but it still give the same symtoms after a few days. After restarting it will goes ready again.

alvin

[anothertech]

Re: MPC 3003 keep restarting by itself after ready.

Boot it up with the hard drive disconnected, does it still reboot?

[slimslob]

Re: MPC 3003 keep restarting by itself after ready.

AC power problems.

[Zaxxon]

MPC 3003 copier keep restarting after a few hours when copier is in ready state. What causes the copier to restart by itself after it is ready state. Could it be the hardisk need replacement. I have reformat the hardisk but it still give the same symtoms after a few days. After restarting it will goes ready again.

alvin

Yes

[slimslob]

Yes

We lost quite a few posts om this thread to the migration. alcin-3000e added a post in which described exact what happens during a "Reboot on Error" It turned out to be a toner supply problem.