Got one that is tossing warmup errors SC542, all components test good. Wall voltage starts at 116VAC and drops to 111 or 110 when the lamps power up. I don't think there is enough juice. Customer wants to replace thermistor anyway, my parts guide shows TSB#014 next to the part number AW10 0102. Has this part been upgraded?
We can get it to come up by interrupting the warmup before it codes out by opening the door a couple times, then it stays working until sleep mode or power off. Any other tricks or tips to keep it working are more than welcome. It is at a residence and we get the same voltage at the panel.
We can get it to come up by interrupting the warmup before it codes out by opening the door a couple times, then it stays working until sleep mode or power off. Any other tricks or tips to keep it working are more than welcome. It is at a residence and we get the same voltage at the panel.
Comment