Toner Boy
Trusted Tech
Last Activity: 1 day ago
Joined: 08-13-2007
Location: upper half, CA
-
My recent experiences: Two identical machines BP-70C31, one was new, one came from a 'reputable' reseller with mismatching page counts for PM/tray counts... -
We use rubber O-rings from hardware store, applies constant forward pressure towards the female connector. After a light sanding of contacts and dose...Leave a comment:
-
SO...was able to install the Application Portal tab onto the op panel, which allows download of the current BOX application v1.2.38.3 (release 2/5/2025),...Last edited by Toner Boy; 3 weeks ago.Leave a comment:
-
Toner Boy replied to MX-3100n - Printing faint black lines side to side & help provide latest Firmware?in SharpDon't bother w/registration
Get either this: MX51NUSA drum unit (easy install)
Or if you want to do it cheapest, re-use existing drum cylinder...Leave a comment:
-
Best ever, if you disagree then you're wrong.
Milwaukee 6546-1 2.4V no longer produced, later models suck
can still be found in various...Leave a comment:
-
Depends on what models you are speaking of....M-series mono have a socket connection problem, we put 0-rings to push the male side in further and clean...Leave a comment:
-
Thanks but I’ve tried those.
I think the new version needs to be from the Application Portal and downloaded.Leave a comment:
-
BOX connector for BP models
Hi, anyone have info or the file for the latest BOX connector?
Installed earlier version, locks up on any scan or when choosing folders/resolution... -
I've taken the wifi card from an old 4070N and installed it. There is some engine switch I think has to be changed too, to enable. I can't find the...Leave a comment:
No activity results to display
Leave a comment: