MPC6000 lead edge reg.

[Gamut]

Hi folks
Newly trained on this kit, long one short.
Print duplex no problem, Scan (glass or dh) and 5mm l/edge reg offset on 2nd side of duplex (lead edge set back 5mm) have searched manual, sp1001= single side l/edge adj but no ADU or duplex any IDEAS.
Cheers Gamut.

[E Winter]

Please check the user tools first - there's a setting for the duplex border/image offset within the copier functions (default is 5mm IIRC).

[Gamut]

Thank you I suspected it would be something simple.

[tcs04]

Hi folks
Newly trained on this kit, long one short.
Print duplex no problem, Scan (glass or dh) and 5mm l/edge reg offset on 2nd side of duplex (lead edge set back 5mm) have searched manual, sp1001= single side l/edge adj but no ADU or duplex any IDEAS.
Cheers Gamut.

On touch screen select Edit / Margin Adjust.

"Clear" the margin (Std =5.0mm)

Press the job program button next to the C/A (yellow) key

Select "Program as default"

Ok

This is from memory, so may vary slightly