MPC7500 3 side erase

[knightfall]

the 5560c had a way to eliminate the 3 side erase leaving only the lead edge erase, does any one know how to eliminate this on the MPC 7500? Thanks

[msaeger]

How did you do it on the 5560 ?

[Saviour]

Do you mean full bleed prints?

[tcs04]

the 5560c had a way to eliminate the 3 side erase leaving only the lead edge erase, does any one know how to eliminate this on the MPC 7500? Thanks

I'm guessing, haven't checked, but try Edit mode on the op panel? if you can clear the 3 edge erase in this section then use the program job button (Diamond / arrow) "set as default" and you should have full bleed on 3 sides. Otherwise may be in SP mode?

[Saviour]

On some models you had a bkue or violet button on the front side jogger of the bypass tray. If this is pressed whilst opening joggers to widest position, would give machine indication for full bleed or A3+ as its sometimes called.

[zyqwiz]

On the printer side, change the 'printable area' on the driver to maximum.