Ricoh Aficio 1035 jams after fuser

[claudioterrible]

1035 paper jam

you could take the bridge unit away from the machine (only to chek if the the problem is with the copier or the bridge),the 1035 is an old machine and sometimes the paper exit sensor fails,the solenoids has a little piece of rubber and sometimes becomes "sticky" and the solenoid doesn t work well,try with these and dont laugh bout my english(i would like to see you writing in spanish)

[fixthecopier]

Thanks to all. I am embarrassed to say what it was but since you all offered help, you have a right to know. It was the paper tray. The select dial was correct but something else must have been stuck. I was trying to get a report to print, and saw it was sideways on the paper.DUH HUH! If I would have noticed that on the first visitI would have clued in, problem was, I was using the out of order sign as a test copy and not paying any attention to it. Same thing used to happen on the Di250's. I slammed the drawer and the correct size reset. Now I can PM the machine. Thanks again for the help.

[Scott_Lewis]

Yer a good man. We've all done it and some can't admit it.