If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Copy looks great from the glass but not so good when using the ADF. Is there a separate density adjustment for the adf? If have looked thru the SP stuff and can't find one.
Thanks
Nope...thats the thing. I have cleaned and checked everything pertaining to the adf scanner. I even changed the user tools setting to full dark. Still much lighter thru the ADF than from the glass.
Comment