Hey everybody. Removed opc master to vac. out due to color bands. Reassembled. At please wait color being adjusted ind. pops sc-305. Retraced my steps. Removed & reinstalled ops master. Inspected corona clng. looks ok. Tried to run corona clng. in simulation mode, it gave an error ind. Please help.
-
-
Remove the cleaner motor and manually turn the rod to free it up. Reinstall the motor and check it out.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+ -
Hope this helps
[SC305] - PCU installed with too much force, see TSB-043[SC305] - defective PCUdischarge harness connector #G0705307 plug contacts bent, can be reformed
B051_043.pdfComment
-
1224C sc-305
Thanks. Yes I did try taking clng motor off & advanced the clnr manualy. It didn't move. Just same code. I didn't look at the discharge connect. I'll tryComment
Comment