MPC6000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • spaceman99
    Senior Tech

    100+ Posts
    • Jul 2009
    • 174
    #1

    MPC6000

    Hello .
    I have a MPC6000 giving me a New years task....
    SC622. PFB (paper feed board) comms error to VBCU. Intermittent fault
    Displayed 6 time yest and twice today. Machine gives error while not doing any thing mode. Turned of sleep mode still does it.
    Have checked all wiring between the pcbs can not see any props.
    Not that keen on getting a new VBCU in.
    OH the machine is new only 5k on the clock.
    Any ideas other than getting a new pcb ???
    Tags: front cover, image quality, mpc6000, pcbs, symptom
    • spaceman99
      Senior Tech

      100+ Posts
      • Jul 2009
      • 174
      #2
      update

      Have been back to the machine and all seems well, but as it an Intermittent fault time will tell.
      Would appreciate any advice......
      Thank you

        Comment

        • tcs04
          FORMER Techie

          1,000+ Posts
          • Apr 2009
          • 1183
          #3
          Originally posted by spaceman99
          Hello .
          I have a MPC6000 giving me a New years task....
          SC622. PFB (paper feed board) comms error to VBCU. Intermittent fault
          Displayed 6 time yest and twice today. Machine gives error while not doing any thing mode. Turned of sleep mode still does it.
          Have checked all wiring between the pcbs can not see any props.
          Not that keen on getting a new VBCU in.
          OH the machine is new only 5k on the clock.
          Any ideas other than getting a new pcb ???
          There is an RTB relating to SC622, but it should be old compared to your machine. Relates to engine firmware. I would always update to the latest anyway!

          1.05:01
          Symptom Corrected or Improvement:
          1. Improved the image quality of ACC pattern detection.
          2. The machine does not print if the power is turned ON while the SR4020 front cover is open.
          3. The results of developer setup execution (SP3812) shows "4(Failed)" mistakenly for the color whose developer has not been set up. Actually, the developer setup has not been failed for the color whose developer has not been set up.
          4. An SP error occurs when the Copy Connector Type 3260 is used.
          5. The detection accuracy of SC622 (PFB connection error) was improved.


          Otherwise,

          Register the fault with RUK level 1 tech support. ask for a case number!

          If level 2 call back and agree to fitting the board you will be able to claim a refund if it doesn't work.

          They may attend to see for themselves!

            Comment

            • spaceman99
              Senior Tech

              100+ Posts
              • Jul 2009
              • 174
              #4
              Thank you for your quick advice.
              I have updated all the all firmware and waiting to see if it requires Leval 2. Have already got case number and athro to change board.

              Once again
              thank you

                Comment

                • spaceman99
                  Senior Tech

                  100+ Posts
                  • Jul 2009
                  • 174
                  #5
                  UPDATE:

                  All appears well on the sc622 front

                  thanks for your input tcs04

                    Comment

                    • spaceman99
                      Senior Tech

                      100+ Posts
                      • Jul 2009
                      • 174
                      #6
                      this came back in. SC622 was caused by the wiring on the lct tray1 rubbing on the frame. repaired by tapping of the sharp edges on the lct. all is well

                        Comment

                        Previous template Next
                        Working...