45 results in 0.0572 seconds.
-
MJ-1112 ribbon cable
Been through the parts manual four times and can't find the ribbon cable that connects the SDL and main PCB's. If someone could give me the page and item... -
755 pcb damaged
Hi I got two 755 pcbs which got damaged by a faulty head (...yeah i'm stupid)
everything works fine except there is 1 of 12 nozzle block... -
9945-450
just replaced pcbs on this one and i need to put it back into vending mode. i didn't see it anywhere in sp mode. i was looking in mode 5 but no luck.... -
teckat started a topic Differences Between the Old (A1) and New (A2) Main Controller PCBs for imageRUNNERin CanonDifferences Between the Old (A1) and New (A2) Main Controller PCBs for imageRUNNER
for all those questions sent to me/ here is the answer from 2002:
Differences Between the Old (A1) and New (A2) Main Controller... -
C6500 Dead
I have a C6500 that does nothing upon start up. There are a few 24 volt fans running, but nothing else. Have a green light on monitor but no screen image.... -
ir6000 trouble
need help....
why my ir6000 move slower. it moves only 50ppm for A4. when i check the counter button it shown iR5000d/iR6000.
is... -
Canon LaserClass 830i "waiting..." message all the time.
I have one of these fax machines that is stuck on "waiting..." Fuses OK on the AC board. When fuser is unplugged get 120VAC on fuser line,... -
Speed adjustments for Canon IR110 to IR125 to IR150?
Hi.
Can a Canon IR 110 have the engine speed, among other things, increased to essentially become and IR 125 or IR 150?
I... -
KM-8030 with blank display
I've got a KM-8030 that only shows a blank display with backlighting on. The machine seems to start up normally but doesn't respond to any commands. It's... -
MPC6000
Hello .
I have a MPC6000 giving me a New years task....
SC622. PFB (paper feed board) comms error to VBCU. Intermittent fault
Displayed... -
Ricoh 2238C Buttons double beeping ?
I'm maintaining a couple of Ricoh 2238C's.
One of them has an intermittent but consistent problem.
A number of the buttons and control... -
change speed AF551 -> AF700
i want to change speed 55 copier to 70 copier , please for me. thank you -
sharp ar-m350n
HY
Y have another issue with one ar-m350n, and before beguin to start the reparation y like read your opinion.
The problem was, the -
ir3570 to ir4570
Hi to all,
From what i know ir3570 able to upgrade to ir4570. what we need for the upgrade?
Any recomandation website to buy... -
iR6870 On/OFF by itself
Hi guys,
I am having this problem with my iR6870C, when the machine is in ready stage, suddenly the machine OFF & ON by itself, it starts warming...
