Hi
Ricoh 2238, making a very loud vibratiing sound, paper jams , just before going towards transfer section, jam indications come up at fuser also even tho the paper doesnt get that far.
on warm up , initially there is that standard startup sounds, but when it trys to intialize the transfer assemblley it makes that vibrating grinding sound, it then stops , as it sometimes it comes and goes,
you can see the shafts of the t belt cleaner slowing down when it starts to jam , but then rotates nicely then jams up again,
some times the noise is continous when it starts to try and copy
any ideas?
Ricoh 2238, making a very loud vibratiing sound, paper jams , just before going towards transfer section, jam indications come up at fuser also even tho the paper doesnt get that far.
on warm up , initially there is that standard startup sounds, but when it trys to intialize the transfer assemblley it makes that vibrating grinding sound, it then stops , as it sometimes it comes and goes,
you can see the shafts of the t belt cleaner slowing down when it starts to jam , but then rotates nicely then jams up again,
some times the noise is continous when it starts to try and copy
any ideas?
Comment