Hi,
Really strange problem but still persist even if so many parts replaced. SC code displayed just after machine is being switched off. Following parts already been replaced by some of my colleagues:
1x B0512160 Charge Corona Assembly
1x B051 9100 Photo Conductor Unit
1x B051 5107 I/O Board
1x B052 5417 Harness - Main Motor
2x AX06 0238 Main motor
1x B0514803 Bracket. Transport Assembly
Today I have tried to work it out but still no joy. The main motor generally does not start. I have had few occasions when the main motor actually started (i had him in my hand) but even though started he was moving for 2-3 seconds and sc 440 triggered again) When i tried to switch m/c off and on straight afterwards the main motor did not want to spin . Few more attempts and spun again for 2 sec and sc 440)
I am going to order a PCU, EX-I/) and BICU but still waiting for your opinion and ideas.
Many thanks for any help in advance
Really strange problem but still persist even if so many parts replaced. SC code displayed just after machine is being switched off. Following parts already been replaced by some of my colleagues:
1x B0512160 Charge Corona Assembly
1x B051 9100 Photo Conductor Unit
1x B051 5107 I/O Board
1x B052 5417 Harness - Main Motor
2x AX06 0238 Main motor
1x B0514803 Bracket. Transport Assembly
Today I have tried to work it out but still no joy. The main motor generally does not start. I have had few occasions when the main motor actually started (i had him in my hand) but even though started he was moving for 2-3 seconds and sc 440 triggered again) When i tried to switch m/c off and on straight afterwards the main motor did not want to spin . Few more attempts and spun again for 2 sec and sc 440)
I am going to order a PCU, EX-I/) and BICU but still waiting for your opinion and ideas.
Many thanks for any help in advance
Comment