B064 Stamp data

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jomama46
    Field Supervisor
    Site Contributor
    2,500+ Posts
    • Apr 2008
    • 2900

    B064 Stamp data

    This one had the HD replaced awhile back and now they want the stamp data. The book says use the "printer firmware card" I tried that and get "no data available" (It has no print scan installed). Is this a special download?There is no 5853 on this model and I tried A292 Stamp data, Engine, Print/Scan and Controller fw to no avail. What is the secret? Don't replace the HD? Deny that they ever had Stamp data?
    Also I coundnt find any "Stamp" data on the Ricoh site for this model.
    sigpic
    You never realize how cheap a professional is until after you let an amateur do it.
    A+; Network +; PDI+
  • TonerMunkeh
    Professional Moron
    2,500+ Posts
    • Apr 2008
    • 3865

    #2
    The stamp data is downloaded to the HDD from the machine. Run SP5-853. Stamp data update instructions are shown in service manual pages 5-21 to 5-24.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

    Comment

    • Jomama46
      Field Supervisor
      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900

      #3
      TM, you looking at the B064 book? Mine says differently.
      At any rate, I went to the old firmware site and it had the stamp data. Loaded it onto an IC card and it gave the prompt to DL, press the button and presto!
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

      Comment

      • TonerMunkeh
        Professional Moron
        2,500+ Posts
        • Apr 2008
        • 3865

        #4
        Ours is a combined manual for the C1, C2 and C3. Might be a different kettle of fish to what you've got.
        It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

        Hit it.

        Comment

        Working...