Hello everyone,
I have an HP CLJ Pro MFP M479fdn which the customer complained about light prints. I started with the transfer belt, which...
180 results in 0.0294 seconds.
-
HP CLJ Pro MFP M479fdn not printing color
-
Firmware
Hi,
I want toshiba eS 506 engine firmware. (T165MWW.xxx) version .
Thank you. -
Xerox 700 127-212
Hi All.
All advice welcome.
Im just after aquiring an other 700 printer.
When I switch the bustled rip on it comes up on the engine... -
Martini Ricoh MP6002 SC670
According to the service manual, you should replace the BCU and the Controller.
But that didn't work.
The machine came up without engine... -
6136 and MIC-4160 - cant get them to talk...
clean install with new hard drive on the fiery.
is there any place i have to set the IP for the engine side?
also note... -
C3350i/C4050i Starter toners waisted.
Hi guys.
Have a out of the box C4050i that needs toner after only 1500 pages. Changed out cyan and magenta after the machine asked for toner... -
Ricoh Pro C5110 SC682-12
The technician tried to install Engine, Network Support, Web Support firmware, System/Copy firmware was not installed. probably should have installed... -
bizhub 458 toner reset
Hello,
bizhub 458 B/W copier has toner reset mode?
I tried either Engine DipSW 32 or 34 but failed. -
Problem with DS-7100 - does not pick up paper
Hello.
I have a problem with the DS-7100 feeder in the Kyocera TaskAlfa 2552ci. There was a broken hinge in the lifting plate - I replaced it but... -
bizhub 558e toner reset
Hello,
I inserted new toner but machine still shows K is low, the Engine DipSW for toner reset mode is 32? -
-
Toner indicator 100% Bizhub 758
Does anyone know how to set the toner indicator on the Bizhub 758/958 to 100%? I say this because on the 8 series it is done with the engine switch 34,...Last edited by elmaligno; 10-20-2022, 04:42 PM. -
cyan problem TASKalfa 2353ci
Hi Guys,
I have a problem with cyan on this machine.
(see attach.)
I already replaced:
all developer and drum units... -
Ricoh SP-C252 replace LSU
I replaced the LSU on one of these machines and can't figure out how to input LD parameters .The book is kind of vague , I got into the service mode ok... -
758 958 toner reset engine switch?
Hi guys, can anyone please help with the engine sw to reset the toner level?
Don't have a manual with me now, going to check if its in the...
