[Dead] Gestetner Dsm415 psu problem

[Gesttech]

Hi,

I have a problem with a psu for machine dsm415. The problem is that the fuse 3.5A only blown. i checked Triac Q K3583
79096
with these Triac there are continuity with e b c. it ok or not. i checked all varistor, resistant, diode, Ic, coil. it ok
can i have a point to point schematic for the psu. help please

thanks

[Fearless V K]

Don't think you'll have much luck finding that.

[PA5RR]

Sorry, you have to get yourself a new PSU ! Maybe.....the large capacitor on the mains side 220v or 110v are dead, cause of old age or high temperature...than capacitance wears, due to vaporating the acid fluids, resulting in short circuiting the capacitor, which then blows your fuse......
Please give us all your solution if you get it working again !!!!!

Sorry for my bad language...