Ricoh Aficio error 322 only on printing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • etsmultan
    Trusted Tech
    • Apr 2007
    • 131

    #16
    some times it occured due to bad sector in hard disk,remove the hard jack and then check it also try other PCB board.

    Comment

    • sandmanmac
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Feb 2009
      • 3981

      #17
      Originally posted by m_donakov
      Thanks too all you gays, i opened agean laser unit clean well every detail, clean all inside of copier well reconected all cables , and finily niw is fine everthing work perfectly bouth copy and print
      Thanks
      Regrads
      who are you calling "gay" ??!!

      Comment

      • m_donakov
        Trusted Tech

        100+ Posts
        • Jan 2010
        • 213

        #18
        Excuse me, but English is not my native language, I thought the guys. I hope you would not be mad at me. Sorry again and thank you for your assistance.

        Comment

        • sandmanmac
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Feb 2009
          • 3981

          #19
          ....I should have been more clear that I was kidding as well...it was obviously a typo...I'm just having fun

          Comment

          • worksmart
            Technician
            • May 2010
            • 16

            #20
            SC322 is caused because if the synchronization detector on the Laser Unit do not receives properly the laser beam.

            Comment

            Working...