Hi Guys, I have a ricoh 2090 with about 1.5 mil on it. Machine works generally fine but if , lets say I create a rectangle size of 8x10 and print it- it comes out skewed - corners don't match by over 1/8" on long side.
24lb hammermill laser paper makes no difference
Buckle adjustments did not show significant improvement.
Registration ass'y is sparkling clean.
Replaced transfer ass'y housing.
Happens from all trays, 11x17 or Ltr.
Please let me know if anyone has an idea on what could be the problem.
Thank you.
24lb hammermill laser paper makes no difference
Buckle adjustments did not show significant improvement.
Registration ass'y is sparkling clean.
Replaced transfer ass'y housing.
Happens from all trays, 11x17 or Ltr.
Please let me know if anyone has an idea on what could be the problem.
Thank you.