DSc - 332 Line position out

sabah_karim

Technician

50+ Posts

Join Date: Sep 2009

Posts: 67
#1

DSc - 332 Line position out

06-22-2010, 08:39 PM

Hi

I have two Nashuatec Dsc - 332 colour shifting line position gone.
Want to how to adjust and basic easy ways.

Thanks
Tags: 332, adjust, belt, calibration, clean, colour, dsc, fuser, line, main, maintenance, nashua, nashuatec, position, pull, replace, roller, run, scratched, sensors, shifting, tools, top, transfer, transfer unit, unit
Jomama46

Field Supervisor

Site Contributor
2,500+ Posts

Join Date: Apr 2008

Posts: 2900
#2

06-22-2010, 09:49 PM

pull the transfer unit, remove the belt and clean the top roller, if the belt is scratched, replace it. clean the ID sensors by the fuser unit. Then run the calibration out of User tools> Maintenance.

sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Comment

Comment