Ricoh Aficio 350 - automatic duplex unit

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • adydinu
    Guest replied
    Originally posted by blackcat4866
    This may sound really simple, but that duplexer has a doorswitch that occasionally goes bad (or more likely unplugged). I haven't seen one of these AF350's in a while, so I can't picture where it is off the top of my head.
    The switch was broken. I changed it, and now everything is working fine.
    Thank you for the solution.
    All the best to you.

    Leave a comment:


  • adydinu
    Guest replied
    Originally posted by blackcat4866
    This may sound really simple, but that duplexer has a doorswitch that occasionally goes bad (or more likely unplugged). I haven't seen one of these AF350's in a while, so I can't picture where it is off the top of my head.
    Thanks a lot for your suggestion. If it is so easy I will figure out how to deal with this malfunction. I'm sure I can find the location of the switch.
    Thanks again for your help.

    Leave a comment:


  • adydinu
    Guest replied
    Thanks for your suggestion. I'll make a try this afternoon. I hope it is so easy. I think it is the switch and I am sure I can deal with something like this.
    Thanks again for your help.

    Leave a comment:


  • blackcat4866
    replied
    Doorswitch

    This may sound really simple, but that duplexer has a doorswitch that occasionally goes bad (or more likely unplugged). I haven't seen one of these AF350's in a while, so I can't picture where it is off the top of my head.

    Leave a comment:


  • adydinu
    Guest started a topic Ricoh Aficio 350 - automatic duplex unit

    Ricoh Aficio 350 - automatic duplex unit

    The story is very simple. I 'm helping a friend to reassemble this kind of copier machine. It is for the first time when I saw something so much disassembled. We succeeded to make the copier working properly with a little exception. The automatic duplexing doesn't work at all. I received a message to reset the duplex unit. The question is if the problem has to be in the hardware or is just a menu command. I don't have any idea regarding the solution for the message and how to solve the problem occurred.
    Can anyone give me some tips/suggestions regarding this?
    Thanks a lot for any help/suggestion.
    And I am so sorry if my question is so silly and makes me look stupid, but I am not a technician used with printer/copiers, am this is just a little hobby for me, and mainly working with printers, but as my second try with a copier it was OK. And also this is my first post here. I only give a try to this machine because has only 63k copies and needs to be revived.
    My emails are: adydinu@gmail.com or adydinu@yahoo.com
Working...