mpc 7500

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • amps
    Junior Member
    • Feb 2010
    • 6

    #1

    [Jamming] mpc 7500

    i have 4 mpc 7500 machines in the same place [12 in total] which have the same jamming problem of jamming in the fuser unit paper wrapping around the fuser belt any ideas
  • Gunhed
    Technician
    • Jun 2008
    • 12

    #2
    Had the same issue, change in paper brand fixed it.

    Comment

    • AyJayAreDii
      Technician

      50+ Posts
      • Jul 2010
      • 99

      #3
      I personally was not involved however I am sure we has some do the same in one customer. changing paper stock cured the problem.

      Comment

      • msaeger
        Trusted Tech

        250+ Posts
        • Sep 2008
        • 333

        #4
        Go through the adjustment procedure for the separation plates.

        Comment

        • amps
          Junior Member
          • Feb 2010
          • 6

          #5
          have done but still jamming around fuser belt

          Comment

          • sim22
            Junior Member
            • Aug 2011
            • 8

            #6
            Re: mpc 7500

            adjust stripper pawls on fuser belt ( procedure in service manual ) cured the same problem for me months ago.

            Comment

            Working...