Aficio 3045 touch display goes out of calibration

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • landspeeder
    replied
    I received the free display today...thats fast..went to the site, changed it..did a recal and left a happy customer to do some copying and check it out!

    Thats great...THANKS all!

    Leave a comment:


  • landspeeder
    replied
    Thankyou so much for your help. This takes a load off of me as the customer has been getting a bit testy.

    Thanks
    David

    Leave a comment:


  • jonhiker
    replied
    rfg039331..pdf

    The touch panel problem strikes again!! Here's the tech bulletin on this issue

    Leave a comment:


  • Eric1968
    replied
    H310 9900 Touch Panel

    There is a problem with a lot of Ricoh touch panels on a lot of models. You can get a new panel almost for free. Here is Holland the list price is € 0,02...

    Leave a comment:


  • Aficio 3045 touch display goes out of calibration

    My customer has to recalibrate the touch display about 3-4 times a day. I've had the controll panal apart cleaned everything but doesnt help. Its under our contract so any ideas other then a new mask and controller? Also anybody have the part numbers?

    Thanks
    David
Working...