Ricoh problem

[edgareddy]

I have a problem with a Aficio 2045, it just started giving me an SC 672. I have changed the controller, the operation panel and I still have the same problem.

[Tonerbomb]

hard drive

[edgareddy]

Sc672

The hard drive comes with the controller and Like I said, I changed the controller.

[tonyd]

hi its a common fault on this machine. change the power supply!!!!!!

[jeffreyozz]

try reloading the firmware with the dipswitch one(i believe on the controller- look in the sm to be sure) turned on. That is what gooses gives anyway.

[edgareddy]

Ricoh problem

Thanx guys for all the information, I finally got the machine going. I booted the engine with dip switch 3 on the IOBoard and it did the trick.

[laxlaw]

Re: Ricoh problem

I have a problem with a Aficio 2045, it just started giving me an SC 672. I have changed the controller, the operation panel and I still have the same problem.

did you solve your problem, what did you do, as I have the same issue, thoughts ?

[mikadonovan]

Re: Ricoh problem

The last post on this thread was more than a decade ago, and he already answered your question in his last post. Edgareddy might not even be alive now. Might want to start a new thread.

[Zaxxon]

Re: Ricoh problem

did you solve your problem, what did you do, as I have the same issue, thoughts ?

Time to sell a new box.

[Phil B.]

Re: Ricoh problem

did you solve your problem, what did you do, as I have the same issue, thoughts ?

PLEASE start your own thread... don't piggyback on someone elses

[slimslob]

Re: Ricoh problem

The last post on this thread was more than a decade ago, and he already answered your question in his last post. Edgareddy might not even be alive now. Might want to start a new thread.

PLEASE start your own thread... don't piggyback on someone elses

Looks like a new tech, joined today, trying to jack up his post count. If he keeps it up, I for one will just ignore him.

[Phil B.]

Re: Ricoh problem

Looks like a new tech, joined today, trying to jack up his post count. If he keeps it up, I for one will just ignore him.

been getting a lot of them lately ...and end users thinking they can 'fix-it' on their own.

[laxlaw]

Re: Ricoh problem

PLEASE start your own thread... don't piggyback on someone elses

OK, thank you

[vickter200]

Re: Ricoh problem

Laxlaw, dont mind these two POS Phil and rimjob i mean slimslob. they tried to pull the same bull on me. Fuck them!

There's a lot of other great techs on this site..

[psteelers]

Re: Ricoh problem

Thanks for making me laugh.