MPC2550 Internal Finisher Won't Staple Correctly

[Ricoh-ono]

Recently had a problem with an internal finisher not stapling the paper correctly. It couldn't pull the paper back in to jog it properly before stapling. The conveyor belts (this is what the manual calls them) were not making good contact with the paper. There are these white plastic "holders" that have to be trimmed or filed in order to improve the belt's contact with the paper. After trimming these holders the problem was solved. Hope this helps anyone who may be fighting this issue.

before.jpgafter.jpg

[totoro]

Great tip. I'll have to remember that.

[rsyarcia]

tnx for the info..

[zed255]

Done this several times already, good tip for those not in the know.

[Daveyboy]

Re: MPC2550 Internal Finisher Won't Staple Correctly

Brilliant thank you

[Dejavu]

[tinfox]

Re: MPC2550 Internal Finisher Won't Staple Correctly

Two HOURS later I thought I should search online...


Thanks. Fixed now

[slimslob]

Re: MPC2550 Internal Finisher Won't Staple Correctly

As the ribs on the conveyor belts wear down, you will eventually end up having to repalce the belts. Good Luck.

Also, paper curl can cause bad stacking on these dogs.