If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have had same on a mpc2500, had to take out the exit/eject section, dismantle it clean all the hard toner off the white plastic wheels, clean the sensor and re-attach the arm on the solenoid.
+1) indispensable work, add air blow exit sensor
"loneliness is an invention of the white man, when we are alone we talk to everything around us, we are never alone" (Ojibwa)
Comment