Hi all have recently started working on these model of ricohs and i am stuck went to a call on one of these machines where it is recording jams in the cover interposer j130 1st paper feed sensor.Customer is using cardstock just wondering if anyone has any ideas i have heard through over techs this could be a faulty main board in the cover interposer not sure what else i should be looking at.Any suggestions would be great.
-
-
I had one where the covers wouldn't feed covers beyond a certain weight, I added a spring to the pick-up mechanism (there is a spot for one) from a replace fuser stripper finger assembly, the compression springs, #AA06 3853. Fit perfectly, ended up ordering springs for the rest of the machines. -
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from Just Manuals | The Internet's largest collection of manuals | Instant Downloads
Paul@justmanuals.comComment
-
Thanks Zed i will try this on monday is this a fairly common problem with this model?Comment
-
Only with heavy covers, lighter stuff goes through pretty well.Comment
-
sorry for the late response turned out to be the interposer tray was slightly bent.
Thanks for the help Zed.
CheersComment
Comment