I've got a 3224C wich will randomly spit out a copy/print with the last half (near the trailing edge) light (blacks come out grey). The dev unit is new, and the PCU is 450 prints past the 120k.
I suspect the black developing clutch, but I'm open to other suggestions since I'm a couple of hours away of ordering the parts and I don't have much experience with them.
In my list of parts to order I already have the PCU, black dev clutch, charge corona and 2kg of C4, in case someone asks.
I suspect the black developing clutch, but I'm open to other suggestions since I'm a couple of hours away of ordering the parts and I don't have much experience with them.
In my list of parts to order I already have the PCU, black dev clutch, charge corona and 2kg of C4, in case someone asks.
Comment