[Error Code] Dsm 645 (nashuatec) sc 450 & sc402

[Guest]

machine is throughing SC450 & SC402.I have checked input through SP mode and the following results by machine.
1.5803 32 input checked and the SC450 appeared.(feed development motor locked.
2. I have checked 5803 69 tranfer belt voltage and SC 402 appeared.

3.tried to initialize 400dpi & 600 dpi in 2109 and machine hung /stopped responding.

I am new and junior .please help me to sort out the problem.

T I A


Saad

[ponto700]

SC 450
Feed Development motor error - excess load on motor
SC 450
Feed Development motor error - replace motor

SC 402
Transfer roller open error - clean or replace transfer clutch home position sensor, #AW020159
SC 402
Transfer roller open error - replace HVPS
SC 402
Transfer roller open error - replace transfer clutch assembly #AX210093

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads


Paul@justmanuals.com

[mikadonovan]

Pull the development unit and see if you can turn the gears by hand. It sounds like it is locked up.