Hi everyone. I have never seen a 1224c before and a tech I help out sometimes wanted to know if just the transferbelt on the pcu can be replaced or if the whole pcu has to be replaced. appreciate the help.
-
-
No you have to replace the whole pcu -
He didnt say why he wanted to replace it. I will be seeing him tomorrow, I will find out what the problem is then. thanksComment
-
If its not cleaning, it may need a new drive bracket assy. (raises and lowers the cleaning assy)sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
is that a common problem with these?Comment
-
Yeah, and the most common problem is - they were made in the first place.It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.Comment
-
great. this is not my unit but i will pass along the information. Thanks a lot for the helpComment
-
Is the brkt you mentioned the Brkt transport assem P/N B0514807 ?Comment
-
best thing to do with a 1224c is tie a chain to it and use it as an anchor.........Comment
-
thats the one.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
Walk away. For your own health and hair left in your head, walk away. Cut off all tie with anyone you know that still has one of these anchors and walk away.
Better yet RUN!Why do they call it common sense?
If it were common, wouldn't everyone have it?Comment
-
same as 2232C & 3232C......-.-"Comment
-
luckily its not mine...I will pass this along. The issue he is having with this is the main motor is dragging. He seems to think its a worn transfer belt so he ordered a new pcu. Make sense or not? I no nothing about this model....Im happy to work on the newer color units.Comment
Comment