sc202 ricoh mp7500

[patrick045]

after changing the polygon mirror motor i still had this problem with the machine .

what else can it be ?

regards

[mikadonovan]

According to the manual, you could also have a problem with the IPU.

[patrick045]

i exchanged the ipu as well , still the code sc202 appears

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads


Paul@justmanuals.com

[mikon88]

SC 202 is Polygon mirror motor error

The polygon mirror motor unit did
not enter "Ready" status within 20
sec. after the motor was turned on,
or within 20 sec. after the speed of
rotation was changed.
Solution
->IPU defective
-> Polygon mirror motor PCB defective
-> Polygon mirror motor defective
->The polygon mirror motor PCB connector
is loose, broken, or defective


Did you get new one polygon motor?