[Error Code] Ricoh Aficio CL7200 color PCU

[Bluezman]

Ricoh CL 7200 has Massage Replace color PCU Type A I have already replaced all the Image units still has massage and fails upon running Color registration

[rthonpm]

Could be that the little spring that tells the machine it's a new unit has broken. You can try manually resetting the PM counter for whichever drum doesn't show as replaced through service mode then rebooting the machine to get it to do pro-con. Also check the transfer belt, the rollers under it and the developer units for signs of wear.

[Bluezman]

Service mode cl 7200

How do you access service mode on this printer???

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads


Paul@justmanuals.com

[Paranoid]

Entering the Service Program Mode - There are two ways to enter the Service Program Mode.
Method 1: Turn the machine on while pressing the On Line key and Escape key together.

Method 2: Press the Up/Down arrow keys together for about 5 seconds, then press the Enter key.

7-804-xxx to reset the unit in question.

1 - PCU [K]
2 - PCU [Y]
3 - PCU [M]
4 - PCU [C]
5 - Dev. [K]
6 - Dev. [Y]
7 - Dev. [M]
8 - Dev. [C]
9 - Oil Supply
10 - PF By-pass
11 - PF Tray 1
12 - PF Tray 2
13 - PF Tray 3
14 - PF Tray 4
15 - Fusing
16 - Transfer
17 - Trans Cln
50 - All

Hope that helps

[oswaldo160]

Re: Ricoh Aficio CL7200 color PCU

Entering the Service Program Mode - There are two ways to enter the Service Program Mode.
Method 1: Turn the machine on while pressing the On Line key and Escape key together.

Method 2: Press the Up/Down arrow keys together for about 5 seconds, then press the Enter key.

7-804-xxx to reset the unit in question.

1 - PCU [K]
2 - PCU [Y]
3 - PCU [M]
4 - PCU [C]
5 - Dev. [K]
6 - Dev. [Y]
7 - Dev. [M]
8 - Dev. [C]
9 - Oil Supply
10 - PF By-pass
11 - PF Tray 1
12 - PF Tray 2
13 - PF Tray 3
14 - PF Tray 4
15 - Fusing
16 - Transfer
17 - Trans Cln
50 - All

Hope that helps

Thanks, but How do you enter in The service program factor, because here you change the serial number. Help me.