af 551 w-sc301

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • T911
    Senior Tech

    500+ Posts
    • Jun 2007
    • 628

    #1

    af 551 w-sc301

    Can't get rid of it. Repl-hv power pack and main charge assly. It has a new drum and blade in it with 12k on them. Maybe i/o ideas appreciated. Thanks t
  • Fearless V K
    Senior Tech

    500+ Posts
    • May 2007
    • 620

    #2
    bad or dirty connection to the corona unit somewhere possibly.
    Don't take that toner with me!

    Comment

    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900

      #3
      I have seen this when the retaining screw has been left off of the charge corona. Other than that, replace the charge assy. Its leaking.
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

      Comment

      • mikadonovan
        Senior Tech

        Site Contributor
        2,500+ Posts
        • May 2008
        • 2931

        #4
        Make sure your drum surface isn't damaged somewhere. Throw another cleaning brush in and see if that doesn't help.
        NEVER ASSUME ANYTHING

        Comment

        • T911
          Senior Tech

          500+ Posts
          • Jun 2007
          • 628

          #5
          the mc assly i replaced was no good. slapped another one in and bingo it's alive again. little cq adjustments but all good. thanks guys.

          Comment

          Working...