[Jamming] Misfeed fusing unit

[Guest]

[TonerMunkeh]

Have you checked the fusing connector for paper scraps?

[myrfinricoh]

Hi, I have inspected very carefully the whole paper path from trays to the fuser section I was unable see any scrap or sliver of paper etc. I used a gentle air blast to dislodge any scraps. I have exchanged the Fuser / Fuser Oil unit with one from another machine that is working perfectly. I have removed and examined the transfer and duplex unit.
None of this has had any effect. I am stumped. regards Myrfin

[Masterchief]

If you removed (working units) from another machine to this machine, With no affect!!! then i would suggest changing the the photointeruptors before the fusing section and paper exit sensor after the fusing section to eliminate these...

[myrfinricoh]

Hi Masterchief, I prostrate myself before you O wise one: I changed the paper exit sensor and lo: all is as it should be, thanks a million , Myrfin