If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I looked thru the operators manual and cant find how to do a quick dial...I have a machine on demo and when I can do this feature they will buy it!!! Any detailed info would be great!!
Thanks
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
where is the address book and is that on the machine and do you have to use a computer?
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
Programming Fax Number and E-mail
Addresses
You can program fax destinations using Address Book Management in the Key
Operator Tools menu under System Settings.
You can also register the programmed fax numbers and e-mail addresses in a
Group.
Note
❒ When you press the {Facsimile} key after changing the contents of the Address
Book, such a message appears that indicates that the destination list has
been updated. Press [Exit]. The standby display appears.
Reference
“Key Operator Tools”, General Settings Guide
“E-mail Destination”, General Settings Guide
“Registering Destinations to a Group”, General Settings Guide
Key Operator Tools (See p.57 “Key Operator Tools”.)
Administrator tools
Address Book Management --
Address Book: Program/Change/Delete Group --
Address Book: Program/Change/Delete Transfer Request --
Address Book: Change Order --
Address Book: Edit Title --
Address Book: Select Title Title 1
Comment